RGS - 22” x 96” Slab Mill
RGS - 22” x 96” Slab Mill

RGS - 22” x 96” Slab Mill

Easily plane and surface long, narrow materials for mantles, beams, cantilever supports, or even visible timber bracing when you upgrade to the 22-inch x 96-inch TrueTrac Router Gantry System.
  • Working Area
    • Material Width: 22 in.
    • Material Length: 48 in.
    • Material Thickness: 2-1/4 in.*
  • Expandable in both length and width
    • Easily add either 27-1/2 or 55 in. extension kits
Working with long but narrow slabs, resin pours, or large glue-ups will never be the same.
Sale price$1,357.00 CAD
  • 90-Day Money Back Guarantee 90-Day Money Back Guarantee
  • Lifetime Warranty Lifetime Warranty
  • Unlimited Phone & Email Support Unlimited Phone & Email Support
  • Clean, Consistent Cuts Every Time Clean, Consistent Cuts Every Time
  • Precision Tools, American Made Precision Tools, American Made
RGS - 22” x 96” Slab Mill
RGS - 22” x 96” Slab Mill

RGS - 22” x 96” Slab Mill

Sale price$1,357.00
Sale price$1,357.00 CAD

Working Area:

  • Material Width: 22 in.
  • Material Length: 96 in.
  • Material Thickness: 2-1/4 in.

This assumes the bottom long axis rails are on the same planar surface as the material being processed.

To handle thicker materials, simply shim under the long axis rails and lift the RGS unit relative to the main support surface.

Outer Physical Dimensions:

  • Unit Width: 29-1/2 in.
  • Unit Length: 112 in.

Total Travel (Spindle Center):

  • Width Travel: 23 in.
  • Length Travel: 102 in.

Unit Weight:

  • 40 pounds

Materials Used:

  • 6063 custom extruded aluminum, satin hard anodize finish
  • Solid Acetal Resin, CNC machined sliding components and end caps
  • 6061-T6 1/4-inch thick aluminum base plate, predrilled for 28 different models of router

The following items make up the TrueTrac 22-inch x 96-inch capacity router sled:

  • Two (2) 27-1/2 inch length RGS guide rails
  • Four (4) 55 inch length RGS guide rails
  • Four (4) Self-Aligning Dovetail Connectors, with 1/4-20 x 5/16 cup point set screws installed
  • Eight (8) Bearing End Caps, installed on rails with 10-24 Type F Machine Screws
  • Two (2) Short Linear Slides (Short Runners) with bubble levels installed
  • Two (2) Long Linear Slides (Long Runners)
  • Two (2) Drop Downs
  • One (1) Router Base Plate, pre-drilled for listed routers (see compatibility below)
  • Fourteen (14) 10-24 threaded, 1/4 inch diameter, 1/4 inch length Shoulder Bolts
  • Six (6) 8-32 x 1/2 L flat head Phillips drive machine screws
  • One (1) 1/8 inch L-shaped hex wrench
  • Two (2) Hand Grip Knobs

If the Threaded Cross Feed version is selected, one of the 27-1/2 inch extrusions above will have the 27-1/2 inch Threaded Rod Kit installed.

Additionally, two (2) knurled thumb screws will be included with the standard hardware packet as well as one (1) hand crank to attach to the threaded rod.

The Threaded Cross Feed units can be moved manually without the rod or hand crank by simply removing the two thumb screws and moving the Router Base Assembly by hand.

Mounting Hole Patterns Pre-Drilled For The Following Routers:

  • Bosch 1617, 1618, 1619, 1619-EVS (fixed base only)
  • DeWalt 616, 618, 625
  • Festool OF1400, OF2200
  • Hitachi M12VC
  • Makita 1100 (Makita RP1800 & RP2301 require blank base plate)
  • Milwaukee 5616, 5624, 5625-20
  • Bora PM-6250 Fixed Base
  • Porter Cable 690, 890, 7529, 97529, 8529
  • Porter Cable 7518, 7519, 7538, 7539
  • Ridgid 2930
  • Triton TRA001, MOF001, TFBR001

Blank plate with one 1/4-inch hole drilled on center available upon request.

Router plates are fully CNC machined 1/4-inch thick 6061 aluminum.

This product ships via UPS and is not deliverable to a PO Box due to size and weight.

Currently we are shipping within 2-3 business days or faster for all RGS units.

We are located in Ohio. Anything East of the Rocky Mountains is generally 3 days or less transit time, with the upper New England area and the west coast averaging 4-5 days.

We can ship internationally via UPS or DHL and frequently ship to Canada.

Available Soon

Product Reviews

What our customers say

Customer Reviews

Based on 2 reviews
Edwards /Ellis
Awesome for even large slabs!

My most recent project included 3ea. 10 quarter 10' x 17" black walnut slabs. We chose the TrueTrac system because my jointer and planer couldn't handle the length and width of the boards. The slab mill was an excellent alternative. The mill along with the Milwaukee 5625-20 did a great job. Once we got everything shimmed properly the mill and router did and excellent job. The Amana RC-2263 router bit performed flawlessly.

Daniel Compton

I like it but don't like the fact that the router sled does not fasten to the rail

90 Day Returns

If you don't love your TrueTrac product or you've ordered the wrong thing, simply let us know, send it back within 90-days and we'll give you a replacement or prompt refund. No questions asked.


Our precision made tools, kits and systems are designed to give you Clean Consistent Cuts every time whether you're ripping plywood sheets or flattening rough cut lumber slabs. If they ever let you down because of an equipment failure on our part, just let us know and we'll bend over backwards to make things right.


We stand behind our products and want you to use them to make beautiful, heirloom pieces for years to come. If something breaks, we'll send a replacement straight away.


Got a question? Speak to one of our woodworking experts anytime between 9-6 Eastern and ask us anything about our products, how to set them up or how to get the best out of them.

Precision Made in Ohio, USA

We're proud to be American. Our family-owned production facility is located in Southern Ohio. We source nearly all our materials and components from Ohio too.