Great tool fast and accurate.
I have been using to square up live edge table tops 26” wide. Works great !!

I recently purchased the TruTrac Square Package and just used it for the first time. What a difference it makes in not only speeding up the process of cutting wood for projects, but significantly increasing the accuracy of the circular saw. Very impressed with it so far!

To sum up the tile it’s just easy to use. The Datto jig works awesome as well and I can’t to get my new shop built and purchase the slab flattening device. Good quality stuff

By careful assembly, checking using an accurate right-angle, no further adjustments were required: the critical step was cross tightening the bolts in an iterative manner while the trac and handle were held clamped in position at 90 degrees. The bolts were a tight fit, but no adjustments of materials were required. Clamping during assembly avoided any play, and right-angle accuracy was preserved when the clamps were removed. An absolute delight to use.

I ordered the Simple Square kit that contained a 24" section of track. Everything was delivered and it was well packaged. I followed the instructions and had a little trouble getting it square. I loosened all 8 bolts and seemed to have succeeded in achieving a good 90 degree position. But when I went to use the Simple Square to square up a new board, I found it was off again. I have a panel T square for a reference and it is accurate. So I followed the alignment directions again. I found that every time I tightened the shoulder bolts, the square would revert to its original position. I reamed out the 4 bolt holes in the handle to get some adjustment clearance. This time it squared up easily and stayed square after tightening the bolts. I have used it about 10 times since and so far it has remained accurate. I believe the shoulder bolt holes did not allow enough clearance for adjustment as they came from the factory. Reaming them ever so slightly has made the difference. I am pleased with the Simple Square and will use it whenever I need it. I will check it for accuracy before using but I am confident it will be fine.