TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&

TrueTrac Pro-Series 4' Starter Kit

  • Adapts any standard circular saw into a precision track guided cutting tool
  • Produces chip and splinter free cuts on both sides of your blade
  • Provides an exact line-of-cut reference for effortless layout and cut setup
  • Includes a total of 57 inches of guide rail, allowing overhang for starting and finishing a 48 inch or 4ft long cut
$289.00 $246.00 CAD Save $43.00
/
Size
  • 90-Day Money Back Guarantee 90-Day Money Back Guarantee
  • Lifetime Warranty Lifetime Warranty
  • Unlimited Phone & Email Support Unlimited Phone & Email Support
  • Clean, Consistent Cuts Every Time Clean, Consistent Cuts Every Time
  • Precision Tools, American Made Precision Tools, American Made
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&
TrueTrac Track Saw Pro-Series 4&

TrueTrac Pro-Series 4' Starter Kit

$289.00 $246.00 Save $43.00
/
$289.00 $246.00 CAD Save $43.00
/

Better Together

View all products

Cutting Capacities:

  • Length: 48 inches total, with 9 inches of overhang
  • Depth: Depends on the blade diameter in use. See below.

The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).

With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches

  • 7-1/4 blade = 1-1/2 inch material
  • 8-1/4 blade = 2 inch material
  • 10-1/4 blade = 3 inch material


The Universal Circular Saw Adapter Plate comes in two sizes.

The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saw

The TrueTrac Pro-Series 4ft track saw kit for circular saw features 48 inches worth of cutting capacity and utilizes the circular saw that you already own.

  • Universal adapter plate converts any standard circular saw into a precision cutting tool
  • Use standard, readily available saw blades rather than specialty blades
  • American-made quality backed with over 15 years on the market

The white anti-chip strips along the edge of the aluminum track will be trimmed during installation and offer three benefits:

  • Exact line-of-cut reference (No more offset measurements!)
  • Prevents chips and splinters from forming on the top surface of your cuts (No more painters tape!)
  • Anti-skid coating permanently bonded to the underside of the strips that make clamping optional with good surface contact

Additionally, the rails are extruded in Cincinnati, Ohio and are designed for easily expanding out for longer cuts using our self-aligning dovetail connectors.

  • Extend the track kit out for your longer cuts when needed but it still breaks apart and stores easily when you're finished.
  • Expand your capabilities with our full range of track saw accessories ranging from clamps to router adapter plates.

The TrueTrac 4ft Starter Kit Includes the following:

  • One (1) 57 inch track
  • Two (2) 57 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench)
  • One (1) Setup Jig
  • One (1) Zero Clearance Block
  • Hard copy of installation instructions
  • Unlimited Ohio-based email and phone support

This system is compatible with virtually any style of circular saw.

The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.

We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.

View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.

Currently in stock. Units will ship either same or next business day. Cutoff for same-day expedited shipping is 1:00 pm ET

BREAK DOWN SHEETS FOR ANY PROJECT

With 57 inches of track and an honest 48 inch cutting capacity, you can easily break down large sheets into smaller sections for virtually any project.

Don't worry about getting the lumber cut 'almost' to size at a big box store, or trying to wrestle the 4x8 sheet through a small jobsite saw. Simply drop the track on top and make your cuts!

★★★★★

"Good straight lines, Excellent instructions, easy ordering and Jacob is quick to answer any questions. Thank you." - Steve G.

Precisely rip and crosscut everything from sheets to solid lumber!
★★★★★

"I finished a 16 step stairway in my home with 1" oak treads and 3/4" oak risers using the TrueTrac 4' Starter Kit and the 24" Pro-Series Guide Rail and everything worked great!
This was my first time using a track system and there was no way I could have been as accurate using my old standby table saw and sliding miter saw. Plus I was able to use my own 7-1/4" Circular saw with the universal track and mounting plate. I highly recommend the TrueTrac Universal system guys, it takes a little time to mount to the plate - but once mounted it turns your old circular saw into a precision portable table saw! Way to go TrueTrac" - Ryan B.

Product Reviews

What our customers say

Customer Reviews

Based on 23 reviews
96%
(22)
4%
(1)
0%
(0)
0%
(0)
0%
(0)
J
James H Geiser

TrueTrac Pro-Series 4' Starter Kit

T
Tim G
Excellent

I bought this to make a cut on a butcher block counter top. It worked great for that but beats my table saw for sheet goods (I bought the extension kit later) and it was a real life saver when I had to make a notch in some wainscoting. The cut would be visible so it needed to be precise. Very pleased with the product and has made me a better contractor.

R
RJ Elliott
Exactly what I was looking for!

I've tried several circular saw track kits. The TruTrac system is the only one that I can say is a good replacement to a dedicated track saw. It's easy to use and very well made.

S
Seth Penney
True trac 4ft.

Have been really enjoying the ease of breaking down sheet goods.
Would it be possible to design a base that would fit a Ryobi skil saw. They have a very small base plate.
Other than that i love it.
Thanks Jacob.

S
S.F.
TruTrac

First let me start by saying overall I love this tool. One thing that I would suggest to anyone looking at buying, get the clamps!! I have read and they say the clamps are not needed. However, the first thing I cut with it was an expensive butcher block counter top. I just about ruined it because it slid on me. Thankfully I bought the clamps. I readjusted, clamped and made the cut. From now on I always clamp the workpiece. It’s not worth risking an expense sheet of birch plywood, etc. Very simple to put together and use. I have two other friends in construction and they are ordering one as well. It is a very good alternative to the expensive track saw. Here is a picture of some closet built in I just finished. All cuts were with the TruTrac.

User picture User picture User picture User picture User picture
123

90 Day Returns

If you don't love your TrueTrac product or you've ordered the wrong thing, simply let us know, send it back within 90-days and we'll give you a replacement or prompt refund. No questions asked.

TRUETRAC TRIPLE ‘C’ GUARANTEE

Our precision made tools, kits and systems are designed to give you Clean Consistent Cuts every time whether you're ripping plywood sheets or flattening rough cut lumber slabs. If they ever let you down because of an equipment failure on our part, just let us know and we'll bend over backwards to make things right.

LIFETIME GUARANTEE

We stand behind our products and want you to use them to make beautiful, heirloom pieces for years to come. If something breaks, we'll send a replacement straight away.

TELEPHONE SUPPORT

Got a question? Speak to one of our woodworking experts anytime between 9-6 Eastern and ask us anything about our products, how to set them up or how to get the best out of them.

Precision Made in Ohio, USA

We're proud to be American. Our family-owned production facility is located in Southern Ohio. We source nearly all our materials and components from Ohio too.