TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&

TrueTrac Pro-Series 8' Combo Kit

  • Adapts any standard circular saw into a precision track guided cutting tool
  • Produces chip and splinter free cuts on both sides of your blade
  • Provides an exact line-of-cut reference for effortless layout and cut setup
  • Includes a total of 105 inches of track consisting of one 57-inch and one 48-inch section with dovetail connectors, allowing overhang for starting and finishing a 96 inch or 8ft long cut
$450.00 $422.00 CAD Save $28.00
/
Size
  • 90-Day Money Back Guarantee 90-Day Money Back Guarantee
  • Lifetime Warranty Lifetime Warranty
  • Unlimited Phone & Email Support Unlimited Phone & Email Support
  • Clean, Consistent Cuts Every Time Clean, Consistent Cuts Every Time
  • Precision Tools, American Made Precision Tools, American Made
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&
TrueTrac Pro-Series 8&

TrueTrac Pro-Series 8' Combo Kit

$450.00 $422.00 Save $28.00
/
$450.00 $422.00 CAD Save $28.00
/

Better Together

View all products

Cutting Capacities:

  • Length: 96 inches total, with 9 inches of overhang
  • Depth: Depends on the blade diameter in use. See below.

The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).

With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches

  • 7-1/4 blade = 1-1/2 inch material
  • 8-1/4 blade = 2 inch material
  • 10-1/4 blade = 3 inch material


The track saw attachment for circular saw comes in two sizes.

The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saw

The TrueTrac Pro-Series 8ft track saw system features 105 inches worth of cutting capacity and utilizes the circular saw that you already own.

  • Universal adapter plate converts any standard circular saw into a precision cutting tool
  • Use standard, readily available saw blades rather than specialty blades
  • American-made quality backed with over 15 years on the market

The white anti-chip strips along the edge of the aluminum track will be trimmed during installation and offer three benefits:

  • Exact line-of-cut reference (No more offset measurements!)
  • Prevents chips and splinters from forming on the top surface of your cuts (No more painters tape!)
  • Anti-skid coating permanently bonded to the underside of the strips that make clamping optional with good surface contact

Additionally, the rails are extruded in Cincinnati, Ohio and are designed for easily expanding out for longer cuts using our self-aligning dovetail connectors.

  • Extend the track kit out for your longer cuts when needed but it still breaks apart and stores easily when you're finished.
  • Expand your capabilities with our full range of track saw accessories ranging from clamps to router adapter plates.

The TrueTrac 8ft Combo Kit Includes the following:

  • One (1) 57 inch track
  • One (1) 48 inch track
  • Two (2) 57 inch length anti-chip strips, installed on track
  • Two (2) 48 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench)
  • One (1) Setup Jig
  • Two (2) dovetail connectors, with setscrews installed
  • One (1) Zero Clearance Block
  • Hard copy of installation instructions
  • Unlimited Ohio-based email and phone support

This system is compatible with virtually any style of circular saw.

The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.

We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.

View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.

Currently in stock.

Units will ship either same or next business day. Cutoff for same-day expedited shipping is 1:00 pm ET

CONTROLLED CUTS FOR PERFECT PROJECTS

Simply put, if you can control your circular saw during the cut and ensure it goes where you want it to, the cut is going to come out exactly as you laid it out.

Drastically reduce your setup times and eliminate cuts that result in wasted materials, extra trips to the hardware store, and headaches that don't show up until you try and assemble your projects.

Upgrade to the TrueTrac 8ft Combo Kit today and make cutting the easiest part of your projects!

★★★★★

"When I researched this tool I saw some comments about the cost and whether it was worth the investment. No it’s not cheap - but neither is plywood. What I have saved on mis-cuts has more than offset the price." - J Watson

QUALITY THAT STANDS OUT FOR A LIFETIME

One of the biggest perks of making your own furniture, or projects that will be gifted, is that you're the one deciding the level of quality that you're satisfied with.

Our tools just make it easier for you to attain that level of craftmanship, without the requisite years of experience required to do something as simple as cut a straight line.

★★★★★

"Can't believe how much time I saved over marking, calculating the saw base to blade offset, and clamping a straight edge. Also, the track saw makes it darn near impossible to screw up ... have clamped the straight edge on the wrong side more times than I would like to admit!" - Dave Hardin

Product Reviews

What our customers say

Customer Reviews

Based on 85 reviews
99%
(84)
0%
(0)
1%
(1)
0%
(0)
0%
(0)
K
Ken Peper
Trac saw

I set up the track saw system on my Dewalt saw and was very impressed with the very first cut on how accurate the cut was and how clean the was with not chatter at all on the 3/4 cabinet plywood I was ripping down. Look forward to using the system on more projects down road.

W
Walker Gotchy
GAME CHANGER!!!!! Straight square cuts with no snipe.

Enormous time saver. I’ve used a number of track and plunge saws through the years. This track is by far the best, full stop. I purchased the 8’ kit with the tool free clamps and a simple square to use in tandem with my milwakee 10.25” saw to save time with a 2.5” thick oak live edge stair landing and treads I was building for a client. This saved me so many hours on that job, it has become a central tool in my shop. I previously purchased the Router Gantry system from these guys a lil over a year ago and couldn’t be happier. Tim and Jacob manufacture superior products aimed at saving time and money, and all the while provide the best customer service I’ve experienced to date. Can’t recommend enough.
~Vitae Customs LLC~

User picture User picture User picture User picture User picture
A
Andrew
I should've gotten this years ago

I had some questions on getting the adapter onto my baseplate on a Friday evening, and Jacob responded almost immediately. I was shocked and didn't think I'd hear anything until Monday afternoon. The dedication to customers is unreal.

As for the track kit, I should've gotten one years ago. Cuts are much faster, easier, and more accurate. I work out of my garage, and this is way better than hauling out a table saw and struggling with sheet goods. I absolutely recommend it.

L
LUIS VASALLO
Trutrack is not tru anymore

I have own the trutrack now for over 2 year and last night i went to make a cut wish i did and found out i was about a 1/16 off for some reason the white strip shrunk for 2 yeas the saw cut right on my line with no issue. What happend i take care my tools end my trutrack looks like i just pull it out of the box

Hi Luis,

The white edge strips are made from polyvinyl, the same blend as used in window frames. It's very unlikely that the strip changed dimensions and shrank.

The most common cause for misalignment between your saw's blade and where the strip is at is due to changing the blade of the saw from a thicker kerf to a thin kerf blade after the strip has been trimmed.

Alternatively, if your blade hasn't been changed, set the saw on the track with it unplugged and raise/lower the saw to different cutting depths. If the quadrant that controls the depth of cut on your saw has gotten bent it will pull or push the rear of the saw blade in or out relative to the track itself. For example at full depth of cut it may pull the blade inward, and then on thinner material when your saw isn't cutting as deep there may be a gap between the blade and the white anti-chip strip along the track.

The AC Strips are a wear item and will need to be replaced after roughly 2 years of consistent use. They are available individually by lengths of 24, 48, or 57 inches and range from $6 - $14.25 currently.

Let me know if there's anything else I can help out with!

T
Terrance Botz
True Trac

True Trac is better than my Delta platinum table saw for ripping sheet goods.
Very happy with it.

123

90 Day Returns

If you don't love your TrueTrac product or you've ordered the wrong thing, simply let us know, send it back within 90-days and we'll give you a replacement or prompt refund. No questions asked.

TRUETRAC TRIPLE ‘C’ GUARANTEE

Our precision made tools, kits and systems are designed to give you Clean Consistent Cuts every time whether you're ripping plywood sheets or flattening rough cut lumber slabs. If they ever let you down because of an equipment failure on our part, just let us know and we'll bend over backwards to make things right.

LIFETIME GUARANTEE

We stand behind our products and want you to use them to make beautiful, heirloom pieces for years to come. If something breaks, we'll send a replacement straight away.

TELEPHONE SUPPORT

Got a question? Speak to one of our woodworking experts anytime between 9-6 Eastern and ask us anything about our products, how to set them up or how to get the best out of them.

Precision Made in Ohio, USA

We're proud to be American. Our family-owned production facility is located in Southern Ohio. We source nearly all our materials and components from Ohio too.