Those toggle clamps are so quick and easy to use. What a good way to make sure your long cuts stay true. Love 'em. Well worth the money.

I bought the clamps to help keep thin ply stable. I wish the clamping screws were a tiny bit longer, but they work well. Being able to slide the clamp under the material (not over the edge) means I can use them all the time. The TrueTrac stays in-place by itself, but the clamps enhance my confidence. They slide easily under the long track.

As solid as the TruTrac system is, I like the peace of mind the toggle clamps give me. They are well worth the cost especially if cutting on a dusty or less than perfectly grippy material.

So far I have used the 57" track and custom cutting table to bevel cut 200 pieces of metal soffit material and 90deg cut/trim 1/8" off 80 sheets of 5/8" plywood with very good results. When cutting the plywood it was very nice to be able to just lay down the track on the pencil marks and make the cut without any clamping whatsoever. No slippage of track.

I have contacted TrueTrac several times for configuration, ordering, and technical support and have received very prompt and courteous response.

I have enough track to make cuts more than 12' long. I see no reason why this operation would not be similarly successful.

Here is a picture of my metal cutting rig. I added the angle iron for added saw base support. Since the material is of uneven cutting surface, there is considerable gap between the saw base and the lower surface of the material being cut. The outrigger adds stability and keeps the bevel angle consistent when cutting. The additional piece of plyform lays on top of the soffit material to keep the material tightly against the saw table.

Thank you.

Solid, adjustable, adaptable, with an ease of use and peace of mind everytime. Simply replacing the provided bolts with longer ones and I’ve been able to maintain a solid connection while ripping 3.5” thick live oak. Great product.
Vitae Customs